Folding container house: innovative force in the construction industry

What is a folding container house?

A folding container house is a foldable building structure designed based on the concept of containers. It uses steel as the main frame and is matched with lightweight wall materials. Through a unique folding design, it can greatly reduce its volume during transportation. After arriving at the place of use, it can be quickly unfolded and assembled to form a usable living or working space. This type of house usually has a standardized size, and its main structure is strong and can withstand a certain load. At the same time, the interior can be decorated and arranged according to needs, and doors, windows, water and electricity facilities can be installed, etc., with the basic functions required for living or working.

Purpose and Application

The design purpose of the folding container house is to meet the needs of temporary or movable buildings in various scenarios and provide a convenient, efficient and economical space solution.

Warehouses and industrial plants

Parking lots and basements

Scenic spots and resorts

Construction sites

Agricultural and livestock sites

Coastal and highland areas

Why it is favored in modern environment

Folding container house is gaining more and more attention and favor in modern architectural environment, mainly due to its many advantages.

Easy to transport: After folding, it is small in size and can be transported by trucks, trains and other means of transportation, which greatly reduces the transportation cost and difficulty, and is especially suitable for use in areas with inconvenient transportation.

Quick installation: No complex foundation construction is required, usually only a small number of workers and simple tools are needed, and the unfolding and assembly of a single box can be completed within a few hours, which greatly shortens the construction cycle compared with traditional buildings and can quickly meet the use needs.

Low cost: The raw materials are mainly steel, etc., the production process is relatively simple, and the manufacturing cost is lower than that of traditional buildings. And because of the fast installation speed, a lot of labor costs and time costs can be saved.

Reusable: After the service life ends, it can be disassembled as a whole or refolded and transported to other locations for reuse, which reduces the generation of construction waste and the long-term use cost, which is in line with the concept of sustainable development.

Space combinable: Multiple folding container houses can be spliced and combined in different ways to form buildings of different scales and layouts according to needs, such as single-story multi-room, multi-story structure, etc., to meet diverse space needs.

Convertible use: It can easily realize the conversion of residential, office, commercial and other functions according to the needs of different periods, and has strong adaptability.

Strong structure: It adopts steel frame and has good earthquake and wind resistance. After reasonable design and reinforcement, it can withstand a certain level of natural disasters, such as hurricanes and earthquakes, and provide users with a safe living and working environment.

Good fire resistance: Some wall materials have fire resistance, which can effectively improve the fire resistance level of the house and reduce the risk of fire.

Main features of folding container house

1.Folding structure design

Through ingenious mechanical structure and connection method, the wall, roof and other parts of the house can be folded up when not in use, greatly reducing the volume. Generally speaking, the height of a standard folding container house can be reduced to one-third of the original height or even lower after folding, which is convenient for storage and transportation. When unfolding, just follow specific steps to quickly restore the complete house structure. The whole process is simple and fast.

2.Modular combination

It has a strong modular feature, and each box can be regarded as an independent module. Multiple modules can be combined by bolt connection and other methods. They can be spliced horizontally to increase the number of rooms, or stacked vertically to form multi-story buildings. This modular design allows the scale and layout of the building to be flexibly adjusted according to actual needs, whether it is building a small single dormitory or a large complex, it can be easily achieved.

3.Durable material

Mainly using high-strength steel, such as channel steel, angle steel, etc., with high strength and toughness, can withstand large loads, and ensure the stability and safety of the house structure. The steel is treated with anti-corrosion to effectively resist rust and extend its service life. Lightweight insulation materials such as rock wool board and polystyrene board are commonly used for walls. These materials not only have good thermal insulation properties, can regulate indoor temperature, provide a comfortable living environment, but also have a certain sound insulation effect, reducing external noise interference. In addition, the wall materials also have fireproof and moisture-proof properties, which enhance the overall performance of the house.

4.Complete internal facilities

Although the appearance is simple, the internal facilities can be improved according to needs. Doors and windows can be installed to provide good lighting and ventilation conditions. Water and electricity lines can be pre-arranged in the wall or floor to facilitate access to the external water and electricity system to achieve water and electricity. Air conditioners, bathroom equipment, kitchen facilities, etc. can also be installed as needed to create a fully functional living or office space.

5.Convenient installation

No large-scale foundation treatment is required. For some sites with good geological conditions, it can be installed by simply leveling the ground. The house is equipped with special connectors and installation tools. The construction personnel can quickly complete the installation according to the instructions. Moreover, the installation process has little impact on the environment and will not generate a large amount of construction waste and noise pollution.

Why folding container house is better than traditional buildings

Compared with traditional brick-concrete structures or reinforced concrete buildings, folding container houses have many advantages.

1. Fast construction speed

Traditional buildings often take months or even years from foundation construction to main structure completion and interior decoration. Folding container houses can be prefabricated in factories and installed on site in just a few days or even hours, which can greatly shorten the construction period and quickly meet the use needs. They are especially suitable for emergency projects and temporary buildings.

2. Lower cost

Traditional buildings require a wide variety of building materials, complex construction processes, and high labor costs. The raw materials of folding container houses are relatively simple, the production process is standardized, and the cost is easier to control. Due to the simple structure and durable materials, the daily maintenance workload of folding container houses is small. However, traditional buildings are prone to problems such as wall cracks and roof leaks over time, and the maintenance cost is high.

3. Good environmental performance

Traditional buildings consume a lot of natural resources such as sand, gravel, and cement during construction, which causes certain damage to the environment. Folding container houses mainly use recyclable materials such as steel, and have a high material utilization rate, which can effectively reduce resource consumption. After the demolition of traditional buildings, a large amount of construction waste will be generated, which is difficult to handle and pollutes the environment. Folding container houses can be disassembled and reused, and basically no construction waste is generated during demolition, which conforms to the concept of green buildings.

4. High flexibility

Once a traditional building is built, its location and purpose are basically fixed, and it is difficult to carry out large-scale transformation or movement. However, folding container houses can be moved to different locations at any time according to needs, or the spatial layout can be reorganized to adapt to changes in different scenes. It has strong flexibility and versatility.

5. Excellent seismic performance

Traditional brick-concrete structure buildings have relatively poor seismic performance and are easily damaged in natural disasters such as earthquakes. Folding container houses use steel as a frame, have good flexibility and ductility, can effectively absorb seismic energy, and have significantly better seismic performance than traditional buildings. They can provide people with safer living and working places in earthquake-prone areas.

Where are folding container houses most commonly used?

1. Warehouses and industrial plants

In some industrial production scenarios, temporary or movable warehouses and plants are required. Folding container houses can be quickly built to provide companies with additional storage or production space. Its sturdy structure can withstand a certain weight of goods and equipment, and can be internally partitioned and arranged according to storage or production needs, while facilitating companies to flexibly adjust the size of space according to changes in production scale.

2. Parking lots and basements

During the construction of some parking lots or basements, folding container houses can be used as temporary management rooms or equipment storage rooms. Its waterproof and moisture-proof properties can protect internal equipment and items, and it is easy to install, does not affect the main construction of the parking lot or basement, and can be dismantled or moved for other purposes as needed after the project is completed.

3. Scenic spots and resorts

Scenic spots and resorts often use folding container houses to meet tourists' accommodation needs or create special service facilities. It can be arranged in scenic areas and transformed into homestays, restaurants, cafes, etc. Its unique appearance can become a scenic spot, and the number and layout can be flexibly adjusted according to the peak and off-peak seasons of the scenic spot to improve resource utilization.

4. Construction site

As mentioned above, construction sites are common application scenarios for folding container houses. In addition to serving as workers' dormitories and offices, they can also be used as construction site warehouses, toilets and other facilities. It can provide convenient living and working conditions for the construction site, and can be relocated at any time as the construction site progresses, which is convenient and practical.

5. Agricultural and animal husbandry sites

In farms and ranches, folding container houses can be used to store agricultural tools, feed and other materials, and can also be used as temporary residences or offices for farmers or herdsmen. It can adapt to the harsh environment of agricultural and animal husbandry sites, resist the erosion of wind, rain, dust and animal feces, and provide stable space support for related production activities.

6. Coastal and plateau areas

Coastal areas often face strong winds such as typhoons, while plateau areas have special environments such as low temperature and hypoxia. With its solid structure and good thermal insulation and windproof performance, the folding container house can resist typhoons in coastal areas and provide people with a warm and safe living environment in plateau areas. It is one of the ideal choices for buildings in these special areas.

How to install a folding container house: a step-by-step guide

Site selection: Choose a suitable site based on usage requirements and planning. The site should be flat, well-drained, and away from areas prone to natural disasters such as floods and mudslides. For long-term use, surrounding transportation, water and electricity access and other conditions must also be considered.

Ground treatment: In general, it is only necessary to level and compact the ground. If you want to build a multi-story structure or have high requirements for the stability of the house, you can pour a simple concrete foundation. The surface of the foundation needs to be level to ensure that the house is stable after installation.

Box transportation and placement

Transportation: Transport the folded container house to the site by appropriate transportation tools. Pay attention to fixation during transportation to prevent the box from shaking and damage.

Placement: According to the design layout, use equipment such as cranes or forklifts to place the box in the designated location. The boxes should be kept at an appropriate distance for connection and subsequent operations.

Unfold the box: According to the operating instructions, first unlock the fixing device of the folding part, and then unfold the box manually or electrically. Note that during the unfolding process, ensure that all components run synchronously to avoid jamming or deformation.

Install wall and roof components: After unfolding, some folding container houses need to be further installed with wall panels and roof covers. Align these components to the corresponding positions and secure them firmly using bolts or slots.

Box connection: If there are multiple boxes, special connectors are required to connect adjacent boxes. High-strength bolts are usually used to pass through the preset connection holes of the box to tighten, ensuring a firm connection and forming a stable overall structure.

Sealing treatment: Seal the joints between the boxes and the surrounding areas of doors and windows, and use materials such as sealing strips or sealants to prevent rainwater, wind and sand from penetrating into the room to ensure the sealing and waterproofness of the house.

Water and electricity installation: Connect the preset water and electricity lines inside the house with the external water and electricity system. When installing water pipes, pay attention to the sealing of the interface to prevent water leakage; the wire connection must comply with the electrical installation specifications to ensure safe electricity use. At the same time, water and electricity equipment such as lamps, sockets, and faucets can be installed as needed.

Debugging: After the installation is completed, debug the water and electricity system, door and window switches, air conditioners and other equipment in the house to check whether they are operating normally. If there are any problems, make timely corrections.

Acceptance: According to the design requirements and relevant standards, the structural safety, sealing, and facility functions of the house are comprehensively inspected to ensure that the house meets the use requirements.

Choose a suitable folding container house: What you need to know

Purpose: Clarify the specific purpose of the house, whether it is for living, office, business or emergency, etc. Different uses have different requirements for the function and layout of the house. For example, living requires considering functional divisions such as bedrooms, kitchens, and bathrooms, while office pays more attention to the openness and lighting effects of the space.

Duration of use: If it is for short-term use, a simpler configuration can be selected; if it is for long-term use, the durability and comfort of the house need to be considered, and better quality materials and more complete facilities should be selected.

Number of people: Determine the size and number of rooms of the house based on the number of people living or using it. Ensure that each person has enough living or activity space to avoid overcrowding.

Climatic conditions: The climate varies greatly in different regions, and it is necessary to choose a suitable house according to the local climate. In cold areas, attention should be paid to the thermal insulation performance of the house, and wall materials with thick insulation layers and well-sealed doors and windows should be selected; in hot areas, ventilation and insulation should be considered, and houses with ventilation design or sunshade facilities can be selected. Wind and moisture resistance should be considered in coastal areas, and wind and sand resistance should be paid attention to in desert areas.

Geological conditions: If installed in areas with unstable geology or prone to natural disasters, such as earthquake zones and flood-prone areas, houses with good earthquake resistance and flood resistance should be selected, and foundation reinforcement measures should be taken.

Frame material: High-quality steel is the key to the stability of the house structure. Steel that meets national standards, has sufficient thickness and high strength should be selected. The quality of steel can be understood by checking product quality inspection reports.

Wall materials: Check the thermal insulation, heat insulation, fire resistance, moisture resistance and other performance indicators of wall materials. Materials such as rock wool boards perform well in thermal insulation and fire resistance. Polystyrene boards are relatively cheap but have slightly weaker fire resistance. They can be selected according to needs and budget.

Manufacturing process: Observe whether the welding parts of the house are firm, whether the surface is flat, and whether there are obvious defects. Fine manufacturing technology can ensure the sealing and durability of the house and reduce the probability of problems in the later stage.

Size selection: Folding container house has a variety of standard sizes. Choose the appropriate size according to the size of the site and the use requirements. If the space is limited, you can choose a small box; if a larger space is required, you can combine multiple boxes or choose a large box.

Layout design: Some manufacturers can provide a variety of internal layout options for selection, and can also customize according to their own needs. Consider factors such as the location of doors and windows and functional zoning to ensure a reasonable layout and easy use.

Installation method: The installation methods of houses from different manufacturers may be slightly different. Choose products that are simple and convenient to install. At the same time, you can ask the manufacturer to provide detailed installation instructions and on-site installation guidance to ensure smooth installation.

After-sales service: High-quality after-sales service can make use worry-free. Find out whether the manufacturer provides warranty services, what is the warranty period and scope, and whether it can provide repairs, maintenance and other services in a timely manner to ensure that problems in the use of the house can be solved in a timely manner.

Keep the folding container house in top condition: Maintenance and troubleshooting tips

1.Key points of daily maintenance

Waterproof sealing: Check the sealing strips at the joints of the box and the edges of doors and windows for aging and cracking every month, and apply waterproof glue in time to prevent rainwater from seeping in and causing rust on the steel structure.

Drainage system: Clean the debris in the roof gutter and floor drain to ensure smooth drainage and prevent water accumulation from weighing down the box.

Anti-corrosion treatment: Check the paint on the surface of the box every year to seep off. After grinding and removing rust from the exposed metal parts, reapply anti-rust paint and outdoor special topcoat, focusing on protecting the bottom, corners and other areas prone to moisture.

Structural stability: Tighten the bolts at each folding connection regularly, check whether there are cracks at the welding points, and contact professionals for correction in time if the frame is deformed.

Lubrication of doors and windows: Apply lubricant to hinges, locks, pulleys and other moving parts every quarter to avoid jamming or rusting.

Glass maintenance: Wipe the glass with a neutral detergent. If the glass glue strips are aged and hardened, they need to be replaced in time to enhance the sealing.

2.Troubleshooting and resolution of key system failures

Tripping or power failure: Check whether it is overloaded or the line joint is damp and short-circuited. Disconnect the power supply and use an insulation tester to test and replace the damaged cable.

Lamp failure: Replace the bulb first. If it doesn't work, check whether the switch or line connection is oxidized. Sand it with sandpaper and reconnect it.

Thermal insulation performance decreases: Check whether the insulation layer of the wall and roof is damp or shifted, replace the damp material and seal the gap.

Indoor damp and moldy: Add ventilation fans, or place dehumidifiers in the corners, open windows regularly for ventilation, and avoid condensation accumulation.

3. Understand when to replace parts or the entire house

When wall materials, doors and windows, water and electricity facilities and other parts are severely damaged and cannot be restored to normal function through repair, parts should be replaced in time.

Why Allstar's folding container house is the right choice for your project

Allstar's folding container house is the right choice for your project because it has many advantages such as convenient installation, efficient transportation, low cost, and strong and durable, which can well meet the needs of various projects.

Convenient and efficient installation: Allstar's folding container house is fast to install, which can greatly shorten the project construction period and save labor costs.

Low transportation cost: The height after folding is very low, such as as low as 0.45 meters, and multiple can be stacked in the same space, which can effectively save space during transportation. Compared with ordinary container houses, it can save freight for users.

Flexible space utilization: It takes up little space when folded, which is convenient for storage and storage. After unfolding, the internal space is considerable, and it can also be partitioned and adjusted according to needs. It can meet various functional requirements such as office, accommodation, warehousing, etc., and is suitable for various scenes such as construction sites, field camps, scenic spots and homestays.

Strong, durable and reliable: Made of high-quality steel, it has excellent durability and wind pressure resistance, can cope with various severe weather environments, such as strong winds, heavy rains, etc., and has a long service life.

High degree of customization: You can choose different sizes, colors and layouts according to the specific requirements of the project. You can also add air conditioning, heating and other facilities to create a personalized space to meet the unique needs of different projects.